What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 28.06.2025 01:49

At one ohm, the resistor has a maximum of 1 watt power.
the problem then depends on "how fast does the fuse operate?".
What is lightning?
8 signs you're mentally stronger than 95% of people, according to psychology - VegOut
A fuse is a non-resetable over current circuit protector.
Here is a simplified AC power diagram.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Observations From Titans Minicamp on Thursday - Tennessee Titans
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Wild card Boisson stuns Pegula - Roland Garros
a photo is worth a thousand words.
The other is “what does a “fuse” do?”
He then describes the function of a fuse.
10 Habits that are Aging Your Gut, According to Experts - EatingWell
These devices are installed between the “hot” and “neutral” and protective ground.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Boy, 8, dies hours after complaining of headache when infection spread to brain - The US Sun
This one hit behind the barn.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
I post the exact comment here.
A Mesozoic myth: Dinosaurs didn’t rule the Earth like we think - Big Think
An AC voltage/ current source, and an ac inductive load.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
what exactly is a ‘surge’ protector?
Finally a silent Snapdragon 2-in-1 - Microsoft Surface Pro 12 review - Notebookcheck
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
nine
These are simplified answers to the original question, and does not change anything I wrote above.
Who was most disrespectful today, Zelensky, Trump, or Vance? Give examples.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
He then describes Rainy Season and Lightning.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Semiconductor Supplier GlobalFoundries to Spend $16B to Boost US Chip Production - Investopedia
This is where the MOV conducts again, and dissipated the energy.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Bond Yields Keeping Climbing. Governments Can Bring Them Down. - Barron's
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Because the load is inductive, the current lags the voltage.(by a bit).
It seems Mohan does not understand the difference between a comment and an Answer.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Barnstars:
The bolt then partially travels down the line to your home.
2024–10–10[John johnson John Johnson ]
The MOV will conduct when the voltage exceeds 50% of line voltage.
But it can get overloaded, and no longer works.
A circuit breaker is similar, but is resettable.
One
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
First Sentence:
For this case there are devices called Metal oxide varistors (MOV).
so, what happens?
[old diagram got deleted by accident]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Edit 2024–10.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This device then solves the entire problem.
The third is lightning and “how it gets conducted into a home.”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
At least they know the answer if they wanted it.
Now when you have a certain ac resistance, then a current flows in a loop.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
But… the neutral is now “floating” because of the 1 ohm resistance.
[image of Common-mode choke]
This is 'the assistant's answer'
There are two important concepts here.
He then asserts :
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Upvotes:
It also is a device that limits the change in current flow.
2024–10–16 [ OO OLAOYE OYEBODE ]
In schematic diagrams this is the symbol for a fuse:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
but I think this circuit , shows a few more pieces.
What does a fuse do?
but this device (an Inductor) … impedes the rapid changes in the current.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
There are three different concepts here that are getting confused.
eight
(Dc diagram shown, AC is similar).